Advanced Coil Design
The condenser coil of this heat pump is designed with aluminum fins and rifled copper tubing to maximize efficiency. The fins and rifling serve to increase surface area, allowing the heat transfer capabilities of the materials to shine.
The louvered top and three-bladed condenser fan of the GSZ140181 were designed to reduce noise levels without compromising performance. This model also has a discharge muffler to reduce vibrational noise.
A biflow filter drier is installed in the liquid line of this heat pump. The filter drier removes moisture and traps impurities, preventing corrosion, freezing, and blockages that can negatively impact the operation of the heat pump.
The cabinet of the GSZ140181 is built to last. Galvanized steel construction, a durable powder paint finish, and a steel coil guard protect your equipment from wear and tear, increasing its longevity.
Goodman’s SmartShift technology, combined with ambient and coil temperature sensors, gives this unit a quiet and effective defrost system. SmartShift also helps to prevent short-cycling, increasing the efficiency of defrost operations.
This unit utilizes a high-efficiency scroll compressor to provide refrigerant flow. Scroll compressors are renowned for operating more smoothly and reliably than traditional compressors.
Goodman installed two layers of compressor protection in the GSZ140181. A suction accumulator collects excess refrigerant, while a crankcase heater ensures that the compressor stays well-oiled by maintaining a temperature that limits oil migration.
Goodman offers a 10-year limited parts warranty when you register your product online within 60 days of installation. An unregistered product has the standard 5-year warranty. See warranty sheet under the “Manuals” tab for more information.
- Type : Condenser
- Product Line : GSZ14
- Operating Mode : Heating and Cooling
- Refrigerant Type : R-410a
- Installation Location : Outdoor
- Compressor Stages : Single
- Capacity : 1.5 Tons
- Cooling BTU : 18000
- Cooling Capacity : 18000 BTU
- SEER : 14.0
- Maximum Sound Level : 72 dB
- Voltage : 208/230 Volts
- Phase : 1
- Frequency : 60 Hz
- Minimum Circuit Ampacity : 12 Amps
- Recommended Breaker Size : 20 Amps
- Suction Connection Size : 3/4 Inch
- Liquid Connection Size : 3/8 Inch
- Product Height : 34 1/2 Inches
- Product Width : 29 Inches
- Product Depth : 29 Inches
- Product Weight : 132 Pounds
- ETL Listed : Yes
- AHRI Certified : Yes
- Parts Warranty : Limited* 10 Years Years